What Is a Cannabis Nectar Collector?

A cannabis nectar collector is a straw-shaped dab device. You heat one end with a torch, then touch that hot tip to a cannabis concentrate. The concentrate vaporizes on contact, and you inhale the vapor through the mouthpiece. It is also called a honey straw, dab straw, or nectar straw. Unlike a standard dab rig, a nectar collector has no separate nail, dome, or banger. The heated tip is the nail, and the tube is the vapor path.

Medical Grade Cannabis Nectar Collector Set Guide

How a Nectar Collector Works

The device has three basic parts: the tip, the tube, and the mouthpiece. Some models add a water chamber to cool the vapor before it reaches your mouth.

Nectar Collector Cleaning Guide: Steps, Tools, and Timing

Heat is the key variable. When the tip reaches a high temperature and touches the concentrate, the concentrate changes to vapor instead of burning. The vapor travels through the tube. A small hole near the tip, or a set of holes, controls airflow. You can cover or uncover these holes with your finger or a carb cap to change the density of the hit.

what is a cannabis nectar collector

Types of Nectar Collectors

How to Use a Cannabis Nectar Collector

These steps assume a torch-heated model and a small amount of concentrate.

how to use a nectar collector for wax

  1. Place a rice-grain-sized piece of concentrate in a small glass dish or keep it in its container on a stable surface.
  2. Hold the tip in the flame of a butane torch until it glows, about 15 to 30 seconds for titanium. Quartz takes longer.
  3. Remove the tip from the flame and wait 5 to 10 seconds for titanium, or longer for quartz, so the tip cools from glowing to working temperature.
  4. Touch the heated tip to the concentrate while you keep the device angled up.
  5. Inhale through the mouthpiece with a steady, even pull as the tip contacts the concentrate.
  6. Lift the tip away from the concentrate and keep inhaling for one or two seconds to clear the tube.
  7. Set the device on a heat-safe stand and let it cool before you touch the tip or clean it.

Temperature and Safety Tips

Cleaning and Maintenance

  1. Let the device cool completely.
  2. Disassemble the tip, tube, and mouthpiece if the model allows.
  3. Soak glass and quartz parts in 91 percent isopropyl alcohol for 30 minutes.
  4. Use a cotton swab or pipe cleaner to remove residue from the tube and tip threads.
  5. Rinse with warm water and let every part air dry before you reassemble.
  6. Replace worn or chipped tips. A cracked tip can leak vapor or break during heating.

FAQ

Is a nectar collector the same as a dab rig?

No. A dab rig uses a banger or nail that stays on the rig. A nectar collector is portable and you bring the heated tip to the concentrate.

Can I use a nectar collector with flower?

No. Nectar collectors are made for cannabis concentrates such as wax, shatter, budder, and live resin. Flower will burn and clog the tube.

Do I need a torch?

Only for manual models. Electric nectar collectors use a battery and a coil or ceramic tip, so they need no torch.