organic pre rolled cones for weed
Empty, unbleached organic pre rolled cones for weed in 1¼, king size, and large formats — how they're made, what fits, and how to pack them.
Quick answer
Most cannabis pre-rolled cones come in four sizes: 70 mm mini, 84 mm 1¼, 98 mm special, and 110 mm king size. Fill weight depends on grind density and moisture. A 70 mm mini holds about 0.3 to 0.5 g. An 84 mm 1¼ cone holds about 0.5 to 0.75 g. A 98 mm cone holds about 0.75 to 1 g. A 110 mm king size cone holds about 1 to 1.5 g.
organic pre rolled cones for weed
Standard cone sizes
- 70 mm mini cone: Short session size. Holds 0.3 to 0.5 g. Common for solo use and sampling.
- 84 mm 1¼ cone: The most common size in the US. Holds 0.5 to 0.75 g. Fits a standard rolling paper width.
- 98 mm special cone: Longer and narrower than 1¼. Holds 0.75 to 1 g. Common in multi-packs.
- 110 mm king size cone: Longest standard format. Holds 1 to 1.5 g. Used for group sessions and larger fills.
- Blunt and party cones: Above 110 mm. Holds 1.5 to 3 g. Paper or leaf wrap changes burn rate.
What changes fill weight
Cone length sets the upper limit. Grind texture sets the actual fill. A medium grind at 58 to 62% relative humidity packs to the listed range. A fine grind packs tighter and adds 0.1 to 0.2 g. A coarse grind packs looser and leaves air gaps. Moist cannabis weighs more and burns slower. Dry cannabis weighs less and burns hot.
How to choose a cone size
- Count users. One person: 70 mm or 84 mm. Two to three people: 98 mm or 110 mm.
- Set dose. A 0.5 g dose fits an 84 mm cone. A 1 g dose fits a 98 mm or 110 mm cone.
- Check the filter. Standard cone filters measure about 26 to 34 mm. Longer filters reduce usable paper length.
- Match the grind. Use a 3 or 4 piece grinder for 84 mm and 110 mm cones. Use scissors or a coarse plate for minis.
Packing notes
Fill in small increments and tap the cone against a hard surface every 10 to 15 mm. Do not overpack the tip. Leave 8 to 10 mm of paper above the cannabis to twist closed. A cone that holds its shape after packing is filled to the correct density. A cone that bulges or splits is overfilled.