Introduction

Pressing weed for rosin at home has become a popular method for extracting resin. It's a process that requires a few basic tools and a bit of know-how. In this guide, we'll walk you through the entire process, from preparing your cannabis to extracting rosin, so you can enjoy high-quality, potent rosin at home.

what is live rosin vs rosin

Materials Needed

Step 1: Prepare Your Cannabis

Start by drying your cannabis if it's not already. Trim off any leaves or unwanted material. Break the cannabis into small pieces and put them into a bubble bag. Spread them out evenly and ensure there are no clumps.

more on this topic

Step 2: Bubble Bag Technique

Using the bubble bags, seal the cannabis pieces between two layers of bubble bags. Apply pressure with your fingers to remove any air bubbles and to get the cannabis to adhere to the bubble bags. The goal is to get a thin, even layer of cannabis across the bubble bags.

rosin press machine for personal use

Step 3: Pressing

Lay the bubble bag on the heat press with the cannabis side down. Close the press and set the temperature to around 210°F (98°C) for about 1-2 minutes. Keep a close eye on the cannabis; you want to press out the rosin but not burn it.

what is live rosin vs rosin

Step 4: Collecting Rosin

Once the heat has been applied, lift the cannabis from the bubble bag. The rosin should have oozed out. Use the parchment paper to scrape it into a glass dish. Repeat this process as many times as needed until you have enough rosin.

Clean-Up

After you're done, be sure to clean up any rosin residue to keep your workspace safe and to maintain quality control.