Cannabis Curing Jars With Boveda: Top Picks and Sizes

The top pick for cannabis curing jars with Boveda is a wide-mouth quart Mason jar from Ball or Kerr paired with one Boveda 62% size 8 pack. A quart jar holds about one ounce of flower with the headspace curing needs, the lid gasket seals tight, and the 62% pack keeps relative humidity near the range most growers target. Every option below was judged on five criteria: seal quality, usable capacity for a home harvest, light and odor blocking, two-way humidity control between 58% and 62% RH, and how simple the container is to open for burping during the first two weeks.

Glass jars for weed curing

Top pick: wide-mouth quart Mason jar with Boveda 62%

Glass plus a two-way humidity pack is the setup most home growers settle on because it is cheap, repeatable, and easy to inspect. Wide-mouth jars let you reach in with a hygrometer or your hand without crushing buds, and the screw band creates a gasket seal that holds humidity far better than a flip-top kitchen jar.

Cannabis Curing Jars and Humidity Control: What Actually Works

Pros

• Air tight lid with a replaceable gasket, so the seal stays good across many burping cycles
• Holds roughly one ounce per quart with a quarter of the jar left empty for air
• Clear glass shows mold, condensation, and bud color at a glance
• Boveda 62% size 8 is sized for this exact volume, one pack per ounce
• Cheap enough to buy a case and cure several strains side by side

Cons

• Glass breaks if it knocks against a hard floor
• Clear glass lets light in, so jars need a dark cabinet or box
• Metal bands rust if you store jars in a damp basement
• Not the best choice for a full pound harvest, since you need many jars

Best for: home growers curing one to four ounces who want a low-cost, proven setup and do not mind burping jars daily for the first week.

read more

Boveda 62% vs 58%: which pack to buy

The 62% pack is the default for curing and medium-term storage. It keeps flower pliable, slows terpene loss, and leaves enough moisture that buds do not crumble to dust. The 58% pack suits smokers who prefer drier flower that grinds clean and burns even, and it is the safer pick in humid climates or for long storage where mold risk matters more than texture.

glass jars for weed curing

• 62%: curing, dispensary-style texture, most climates, storage up to about six months
• 58%: humid rooms, long-term storage, vapers and joint rollers who want a dry grind
• Pack size: size 8 for up to one ounce in a quart jar, size 67 for up to one pound in a larger container

Use one pack per jar and never mix a 58% and a 62% pack in the same container. Replace the pack when it turns stiff and crunchy. A soft pack still has working life left.

Alternative: CVault stainless steel container

CVault builds opaque stainless containers with a lid that holds a Boveda pack in place. They cost more than glass but solve two problems at once: light exposure and pack placement.

Pros

• Blocks light completely, which protects cannabinoids and terpenes
• Lid has a built-in holder so the pack never sits on the flower
• Stainless steel will not shatter or absorb odor
• Sizes run from small personal jars up to multi-ounce containers

Cons

• Higher price per ounce of capacity than Mason jars
• You cannot see the flower without opening the lid
• Metal conducts heat, so temperature swings hit the flower faster

Best for: long-term storage, travel, and anyone who keeps jars in a room with indirect light.

Alternative: Grove Bags TerpLoc

Grove Bags uses a film that regulates oxygen and moisture, and the brand markets it as a cure-and-store bag that reduces or removes the need for daily burping. It is a different format from a jar, but it belongs in this comparison because it competes for the same harvest.

Pros

• No daily burping routine, which helps growers with large harvests
• Folds flat when empty and takes little shelf space
• Low cost per ounce of flower stored
• Works with a Boveda pack added for extra humidity stability

Cons

• You cannot watch the flower through opaque film
• Less forgiving if buds went into the bag too wet
• Not the reusable workhorse a glass jar is

Best for: growers curing a half pound or more who want a low-touch process and have already dried flower to a stable moisture level.

Alternative: amber glass jars for small amounts

Amber glass blocks UV light while keeping the airtight seal and visual check that make Mason jars popular. The tradeoff is size, since most amber jars top out at 16 ounces.

Pros

• Filters UV light that degrades THC and terpenes
• Good for an eighth to a half ounce per jar
• Looks clean on a shelf and works well for strain separation

Cons

• Limited capacity, so a full ounce needs two jars
• Many amber jars have narrow mouths that make filling messy
• Costs more than clear Mason jars of the same volume

Best for: personal stashes of a half ounce or less and growers who keep several strains in small batches.

Jar size and headspace chart

Fill jars no more than three quarters full. Buds need air around them for the cure to work, and an overfilled jar traps moisture against the glass.

• 4 oz jar: 1/8 oz flower, one Boveda size 8
• 8 oz jar: 1/4 oz flower, one Boveda size 8
• 16 oz pint jar: 1/2 oz flower, one Boveda size 8
• 32 oz quart jar: 1 oz flower, one Boveda size 8
• Half gallon jar: 2 to 4 oz flower, one Boveda size 67

Step by step: curing with jars and Boveda

1. Dry branches until small stems snap instead of bending. This takes about 7 to 10 days in most rooms.
2. Trim buds and fill each jar three quarters full.
3. Add one Boveda pack per jar, sized to the flower weight.
4. Seal the jar and store it in a dark spot between 60 and 70 degrees Fahrenheit.
5. Burp for 5 to 10 minutes once a day during week one, every other day during week two, then once a week.
6. Check for ammonia smell, white fuzz, or condensation on the glass. Any of those means the flower went in too wet.
7. Cure for at least two weeks. Four to eight weeks brings out more of the aroma on most strains.

Common mistakes to avoid

• Adding Boveda to wet flower. The pack stabilizes moisture, it does not dry a wet harvest, and mold will follow.
• Overfilling the jar past the three-quarter mark.
• Storing jars on a windowsill or under a grow light.
• Reusing a pack that has gone crunchy and stiff.
• Putting two strains in one jar, which blends the terpene profiles.

Which setup to buy for your situation

For a first cure of one to four ounces, buy four wide-mouth quart Mason jars and a four-pack of Boveda 62% size 8. For a harvest over a half pound, split the flower between Grove Bags for bulk and a few quart jars for the buds you want to sample along the way. For a stash you plan to keep past six months, move to CVault containers with 58% packs to reduce mold risk and block light. For small strain samples under a half ounce, amber glass jars with 62% size 8 packs give you UV protection without wasting shelf space.